Monday, September 30, 2019

How Much Power Does Durastill Water Distiller Consumes?





Are you curious to find out how much power does a small water distiller from DuraStill consumes? Watch this video!

This durastill water distiller uses 1000 watts heating element. I was surprised as of how accurate it actually consumes. My Kill-a-Watt meter actually registers exactly 1000 watts (without the cooling fan on).

When the cooling fan turns on, total power consumption is 1045 watts.

1045 watts is needed continuously. Same before water boils, after water boils, after it is producing distilled water, etc... ALWAYS 1045 watts!

If you want to buy a power measuring device like my Kill-A-Watt meter, please my link below:
https://amzn.to/2mW6LbP

If you want to buy a DuraStill Water Distiller, please use my link below:
https://amzn.to/2nRIL9V

#killawatt #durastill #distiller


Sunday, September 22, 2019

Changing OIL for RAM 1500 ECODiesel

Tools and Materials you need to change oil for your RAM 1500 EcoDiesel:

Oil filter for RAM 1500 EcoDiesel

68229402AA Engine Oil Filter for 3.0L V6 Ram 1500 2014-2018 Jeep Grand Cherokee 2011-2018 Chrysler Lancia Maserati 68109834AA

https://amzn.to/2LIujdS


Shell Rotella T6 motor oil 5W-40 Diesel:

Shell Rotella T6 Full Synthetic 5W-40 Diesel Engine Oil (1-Gallon, Single Pack, New Packaging)


https://amzn.to/2LJjGr0


If you overfill your oil, use this syringe to pump it out slowly:
https://amzn.to/2mgr9Ua



Monday, September 16, 2019

CRACK STIX permanent expansion joint filler [FULL HOW-TO]





This is the missing instructional video for Crack Stix. I searched everywhere for a good how-to video for crack stix and did not find any. So I decided to create one myself. I hope this is helpful for someone.

Here are the steps you need to do to lay down and torch crack stix:

1. Prepare and clean the hole / crack.
2. Pour sand in to the crack until 1/4 inch from the top.
3. Lay down the crack stix and press down compacting the sand.
4. Torch and melt the crack stix, working in small sections (about 1 - 2 feet at a time).

I hope you find this video useful, if you do please hit the LIKE button and SUBSCRIBE to my channel.

If you would like to buy Crack Stix, please use my link below:
https://amzn.to/32UQgw3

If you would like to buy the torch I used here MagTorch, please use my link below:
https://amzn.to/2Qe1cDp

#crackstix #plystix #crackfiller


Sunday, September 15, 2019

Handsfree Touchless Faucet Valve by TapMaster (install & review)





Are you wondering how to install a handsfree touchless faucet valve system from TapMaster. This is the same touchless faucet used in medical offices. I have just installed this one for my wife.

This touchless faucet valve is made by TapMaster. Here is a link to the manufacturer's website:
The model I bought was the TapMaster Kickplace Model 1750
https://www.tapmaster.ca/product-cate...

It works with any faucet, so you can keep your existing faucet. This valve will go in between your water supply (ball valve) and your faucet. Even though most people install this in their kitchen, you can also use this for your bathroom sink.

The TapMaster Kickplate 1750 is a high quality product. The is not electricity / electronic to install. The valve is 'WATER POWERED'. The Tapmaster valve is very well engineered and a breeze to install. My total install time was only about 20 min (not bad for not being a plumber, hahha).

If you are thinking of buying this TapMaster Kickplate 1750 or other touchless variety, please consider using my Amazon link below:

Euro model:
https://amzn.to/2ZZKsDE
Cabinet door model:
https://amzn.to/2O2V8eb

Thank YOU for watching, please don't forget to SUBSCRIBE to support my channel. :-)

#tapmaster #handsfree #touchless


$7.99 Extendable Arm Cell Phone Holder Car Mount [Worth Every Penny!]





I bought this extendable arm cell phone holder car mount from Amazon for only $7.99 (was on sale). This video will demonstrate how I used it in my RAM 1500 truck. This mount is very versatile, it can be mounted on the windshield or dashboard.

This cell phone holder is made by MaxBoost.

If you would like to buy this cell phone holder, please use my Amazon link below:

https://amzn.to/301C1Yj

Thank You for Watching and Please subscribe to my channel.

#maxboost #cellphoneholder #cellphonemount

Saturday, September 14, 2019

HIKARI LED Headlight bulbs - Install and Review (see it in action at nig...





Complete unboxing, install and review of the Hikari LED headlight bulbs. The HIKARI bulbs I have is the 9012 HIR2, low beam for my RAM 1500 truck.

This LED bulbs produce 9600 lumens, it has good light spread and it has adjustable base to ensure 9 and 3 o'clock position.

After using the hikari led headlight bulbs for 1 week, I do like them, I recommend them and will keep them on my truck.

If you would to buy these Hikari LED Bulbs please my link below:

9012 HIR2:
https://amzn.to/2ZTcsJ3
9004 HB1:
https://amzn.to/34KMln1
9005 HB3:
https://amzn.to/2O2feVK
9006 HB4:
https://amzn.to/2Lx5AZS
9007 HB5:
https://amzn.to/2ZVGUlz
H1:
https://amzn.to/2NZMGMM
H11 (H8/H9):
https://amzn.to/2ZU3CLI
H13:
https://amzn.to/2ZVXMcS
H4 9005:
https://amzn.to/2Lxowrp
H7:
https://amzn.to/2ZZI28O

#hikari #ram1500led #ram1500

Wednesday, September 11, 2019

[EASY] How to PORT phone numbers to Twilio (full process)





Quick easy to watch video to show you all the steps you need to do and what to expect to PORT a phone number to Twilio.

Issues covered:

1. How to start the porting process at Twilio
2. How to get needed information from current number (where you are porting from).
3. How to fill-out the Twilio porting form.
4. What to expect (I describe all the things that may happen in the next few days / weeks)
5. and finally, how you can start using your newly ported number.

If you would like to Sign-Up for Twilio please use my link:
www.twilio.com/referral/3Z8jt5

#twilio #portingnumber #porttotwilio

Tuesday, September 10, 2019

XtremeVision LED Anti Flicker Capacitors + CANBUS Error Remover





Unboxing and review for XtremeVision LED Anti Flicker Capacitors + CANBUS Error Remover.

Exact title of this product is:
XtremeVision LED Anti Flicker Capacitors - Error Code Canceller Capacitor (1 Pair) - 9006/9005 / 9012 / H10

Please help support this channel by using my link to buy this XtremeVision LED Anti Flicker Capacitor + CANBUS Error Remover:

https://amzn.to/34B6A6u

#xtremevision #antiflickercapacitor #canbuserror

Monday, September 9, 2019

Buying USB C Charging cable that works!

I have bought many USB C charging cables. Most are just cheap trash that works for a few weeks and they start to break and stop working.

I want to share this link because this is the one that works for me for more than 1 year.

These USB C charging cables are very high quality and very cheap for the price.

https://amzn.to/319aIZv

I hope you like these cables as much as I do.

Thanks for reading

Tuesday, September 3, 2019

How I got LOCKED OUT of my RAM 1500 while doing REMOTE START!!!





Watch this video to prevent yourself for being locked out accidentally!

I got locked out from my RAM 1500 while the engine is running! I will show you how it happened and how you can prevent it from happening to you.

If you need to buy a key fob (original OEM fob), you can buy one from Amazon for $49.95 here:
https://amzn.to/2LoZ99W

#ram1500 #ram1500lockpick #remotestart


Saturday, August 31, 2019

RAM 1500 Headlight Upgrade to Super Bright LEDs - Low Beam - Oxylam 9012...





Unboxing and review of the Oxylam 9012 HIR2 led bulbs for my RAM 1500 truck headlight LED (low beam).

This LED claims to have 10,000 Lumens. It seems to be quite well made. It comes with manual (instructions) and a pair of bulbs.

There is no resistor or can bus decoder included.

I have installed this in to my RAM 1500 truck. I am not very happy with the brightness and the beam pattern of the bulb on the street. When I see the patter on the garage door test, it looks okay, but on the street (dark, at night), I can tell bright and dim spots.

I bought these bulbs at Amazon for only $29.99
https://amzn.to/2ZHd2p9

I am going to return these bulbs and try out the Hikari bulbs:


Watch my Hikari video to find out how Oxylam compares to Hikari.

I also have another video for Ram 1500 High Beam (which I am very happy with). Please watch that video here:
https://youtu.be/4vLF8PoSgkE

Thanks for watching, please SUBSCRIBE and LIKE this video

#oxylam #oxylam9012 #oxylamled


Renogy E-Flex Portable Solar Panel (5 watts) with USB plug - Unboxing an...





In this video I will show you everything that comes in with the Renogy E-Flex portable solar panel. This solar panel produces 5-watts.

This is a very cool, flexible solar panel. It is made/coated with a rubbery material that make it very durable. It feels strong and very well made. I like Renogy products. They are usually very good quality.

This solar panel can produce up to 5 watts on ideal sunny days. It comes with 4 suction cups you can attach to the 4-corners of the solar panel. And a carabiner clip which allows you to hang this solar panel from your backpack.

I will also demonstrate how this solar panel can help charge my portable battery bank made by Tomo.

If you are interested to buy this Solar Panel, please use my link below:
https://amzn.to/2LcchjQ

Thank you for watching, please LIKE and SUBSCRIBE!

#renogy #solarpanel #portablesolarpanel


RAM 1500 Headlight Upgrade to Super Bright LEDs - High Beam - Car Rover ...





Unboxing and review of the Car Rover 9005 HB3 led bulbs for my RAM 1500 truck headlight LED.

I am using this LED bulb for my High Beam. It works well and it is as bright / brighter than I expected. I am happy with this LED bulb.

I bought the Car Rover 9005 HB3 from Amazon for $26.99
https://amzn.to/2PvjJuw

#carrover #ledupgrade #headlightupgrade


Lesson 1: Striking an ARC - Learn How to Weld Series





This is Lesson 1 of my Learn How to Weld Series. (Using Stick Welding)

Please SUBSCRIBE to my channel to see more videos from this series.

In this video we will learn how to strike an arc and start welding. The important points to know are the following:

1. There are 2 ways to start an ARC: Tapping -or- Scratching
2. Once the ARC has started, you would want to pause for about 1 second to build up the pool of molten steel.
3. Then you can slowly move your rod away slowly while KEEPING really close to the existing pool.

In the next video we will learn how to keep the ARC going and keeping your weld straight!

We are using a cheap but good stick welder from Amazon:
AMICO 160 Amp Dual Voltage Input DC Welder IGBT Inverter Welding Soldering Machine
https://amzn.to/2zC1QiQ

We are using Hobard 7018 welding rod. You can buy it here:
https://amzn.to/2NHpkvb

#howtoweld #stickwelding #welding


Wednesday, August 28, 2019

Follow up review of the Chapin 4720 Hydrofeed Liquid Injector - DO NOT BUY!





See Part 1 of my review / unboxing here:
https://youtu.be/BeFDB1R4zcM

After installing and using this Chapin Hydrofeed Liquid Injector for about 2 weeks...

I have nothing but trouble!!!

Constant leaks day by day. The leaks are not from the attachment of the system to my pipes. The leaks are from the clear flimsy 1/4 inch hoses and from the top cover of the tank.

I have contacted Chapin by phone, they claim they have never heard of any issues like this.
They offered a replacement, but I told them that will not solve the problem, because the problem is the flimsy rubber clear hoses and the rubber seal on top of the tank. Those are the ones leaking!!!

I don't trust them when they said they never heard of anybody having same problem.

This was NOT a cheap system, it cost about $80 on Amazon!
See link here:
https://amzn.to/2NEctK4

Anyways, I just want to make this video to let people know about my experience.

#chapin #liquidinjector #hydrofeed

UConnect Firmware Software Upgrade for RAM 1500 (2014-2018)





Quick guide to show you how to upgrade / flash your uconnect firmware to latest version. This is a super easy process, I am going to show you step by step throughout the ENTIRE process until you see the successful message.



You can get the firmware from this URL:

https://www.driveuconnect.com/support/software-update.html



Download it and just copy the bin file (binary file) to your USB thumb drive.



Then continue watching the video.



Do you need to buy a USB thumb drive? Please consider using my link below:

https://amzn.to/2zp9MUC



Thanks for watching.



Please don't forget to hit the LIKE button and SUBSCRIBE!!!



#uconnect #uconnectupgrade #ramfirmware


Upgrading RAM 1500 Dome / Cabin light to SUPER BRIGHT LEDs! (2014-2018) ...





How to replace your RAM 1500 truck's dome / cabin light to LED. Upgrade your RAM 1500 truck interior dome light to much brighter LED.



I will show you how to remove the plastic housing, how to modify the electronics to fit this brighter LED. Easy to do, but you need to know how to solder.



You can buy the LED I am using in this video here (only $1.25 each):

https://amzn.to/349z9HW



#ramcabinlight #ramdomelight #ram1500

Monday, August 26, 2019

SPRINKLER Injection system / Liquid Injector System / Fertigation / Pest...





Detailed video how I made my own DIY sprinkler liquid injector system. This system allows you to inject any type of liquid along side your sprinkler system. With this system you can spray fertilizer, pesticide, and any liquid you can think of.

This system simply inject any liquid through your irrigation / sprinkler system using an inline liquid injector provided by Chapin (pls find link to Amazon) below.

This is a very long video but you can skip to different parts using this time table:
0:08 Design and Planning
4:43 Cutting the pipes
5:49 How it works / How the water will flow
9:53 Glueing the pieces
26:13 Cutting the sprinkler system pipes
40:17 Putting on insulating foam
41:09 Installing the system to the sprinkler system
44:59 INSTALLED - explaining the system
47:06 Installing a 3rd (forgotten valve)
53:24 Summary

Here are the parts list for my fertigation system:
Chapin liquid injector:
Chapin International Chapin 4720 HydroFeed 2-Gallon in-Line Auto-Mix Fertilizer Injector Sy
https://amzn.to/2U6yGSq

1-inch pipes from Home Depot

1-inch valves (qty 3) from Home Depot

I hope this video is useful if you are thinking about making your own fertigation / liquid injector system to your existing sprinkler/irrigation system.

Please LIKE and SUBSCRIBE!

Don't forget to SHARE!

Thanks for watching!

#fertigation #sprinklerinjector #irrigationinjector

Friday, August 16, 2019

[PROPERLY] Replacing / Installing Air Filter in RAM 1500 Trucks. 2009 - ...





Replacing / installing a new K&N high-flow air filter into my RAM 1500 truck how-to do it properly.



I am replacing my stock OEM air filter with K&N 'high-flow' air filter which is also washable and reusable.  I have the link below if you want to buy from Amazon:



https://amzn.to/2HbL2U9



#ramairfilter #airfilter #ramtrucks


Wednesday, August 14, 2019

*FIXED* Leaking Sprinkler Valve - How to check bad solenoid or diaphragm?





This video will show you how I fixed a leaking sprinkler valve. I have an opening with 2 valves. Only one of them is leaking. I have to identify which one is leaking and figure out which part to replace. How to check if solenoid is bad or diaphragm is bad? How to repair sprinkler leak? How to fix leaking sprinkler valve? How for fix Hunter sprinkler valve.

If you would like to buy a Hunter Valve Solenoid or Diaphragm please my Amazon link below:
Solenoid:
https://amzn.to/2H6Eeaq
Diaphragm:
https://amzn.to/31EkJ0q

#huntersolenoid #hunterdiaphragm #huntervalve


*FASTEST* Programming Garage Door Opener Buttons for RAM/JEEP/CHRYSLER C...





How to program your garage door opener buttons in your truck or car, works with RAM / JEEP / CHRYSLER vehicles.

This is a very quick way, just using your existing handheld transmitter you already have. You don't need to go up to your garage door opener operator (machine) to press the learn button.

#garagedoor #garageopener #ram



Saturday, August 10, 2019

CUT / STRIP OFF Electrical MC metal cable in LESS THAN 30 SECONDS!





Using 2 vice grips and a twisting motion is the best way to cut / strip off electrical MC metal cable. My video will demonstrate how to do it in less than 30 seconds.



Sunday, July 28, 2019

Installing outdoor electrical extension cable, plug and receptable (80 f...





This video will show you how I installed an outdoor electrical receptacle (electrical plug) (outdoor wall plug) behind my pool using an outdoor electrical cover and extending an electrical plug from 80 foot away.

This outdoor plug is completely weatherproof with its flip-down cover.

Check out my previous video which explains how I assembled the plug into the 2-gang receptacle assembly.
https://www.youtube.com/watch?v=TCF2W...

#outdoorreceptacle #extensioncable #outdoorplug


Outdoor electrical plug / switch cover - Weatherproof Receptacle Cover -...





In this video I will show you how and install this outdoor electrical plug / switch cover - 73 in 1 configurations.

This 2-gang outdoor plug/switch cover is made by Commercial Electric. I can not find this exact one on Amazon but there is a similar one, please use my Amazon link:
https://amzn.to/2SLpuCr

keywords:
outdoor electrical switch plug, Weatherproof Horizontal/Vertical Receptacle Cover, 2-Gang Extra Duty Non-Metallic Low Profile,outdoor electrical cover, WCWL2PG, receptacle cover, 2 gang outdoor





Monday, July 22, 2019

Do NOT buy Zhiyun products - no warranty - no support!





This is my complain, ranting and warning video about my experience buying Zhiyun Smooth Q Gimbal from Bestbuy. My Son bought this gymbal used it about 60 days and it broke. Being after 60 days he can not return to Bestbuy. He tried calling and getting warranty, but got nowhere. My wife tried and I even tried myself (I am pretty damn persistent) (we called and emailed). Basically Zhiyun does not have any support or does not answer to anyone. I wish I would have know. So I have a $99 paper weight thanks to this A-hole Chinese company.

If you want to buy a good gimbal buy the DJI OSMO MOBILE instead. Click here to buy DJI OSMO Mobile:
https://amzn.to/2SuW6Qw

#zhiyun #donotbuy #zhiyungimbal

Saturday, July 20, 2019

Replacing media filter in your AC Furnace / HVAC (less than 1 min)





Easy to follow video showing you how to change your media filter in less than 1 minute. I am replacing a honeywell 20x25 media filter (see Amazon Link in description and comment to buy one).



Please click Amazon link below to buy these Honeywell 20x25 (4 inch thick)



https://amzn.to/2Yi5axx


Monday, July 8, 2019

ZWAVE Inclusion / Exclusion - Must See Tips!





Zwave network is quite difficult to work with. Combined with different manufacturers method of invoking inclusion / exclusion modes, makes zwave inclusion / exclusion a nightmare. I have some tips that will help you do inclusion and exclusion easier and with less frustration.


Sunday, July 7, 2019

Don't buy cheap chinese wireless chargers!





I bought 2 cheap chinese chargers hoping that I can implement them info custom furniture chargers. But I was quickly disappointed when they barely work properly. These are suppose to be the higher quality 10W chargers. But they bare output any power! Totaly bullshit. Do not buy!

Samsung SmartThings v3 (2019) UNBOXING





Unboxing of the Samsung SmartThings v3 (version 3) from 2018, but I bought this in July 2019. This is the newest version of the Samsung Smart Things.

Please use this link to buy the Samsung SmartThings v3 from Amazon:

https://amzn.to/2S2e7p5

#smartthings #samsung #unboxing

HydroFeed 4720 by Chapin - Fertigation Garden Hose Inline Liquid Injector - Unboxing





Unboxing of the hydrofeed / hydro feed 4720 from Chaping, inline liquid injector. This is also known as FERTIGATION. This system is usually used for putting down fertilizer for your lawn. Simply fill in your fertilizer or liquid solution inside the 2 gallons container, set the speed dial and you are ready to go.



Please like and subscribe!



If you are buying this HydroFeed please use my Amazon link below:



https://amzn.to/2LIcWu3



#hydrofeed #inlineinjector #liquidinjector #fertigation

Wednesday, June 19, 2019

Ulanzi Wide Angle Lens for DJI Osmo Pocket - unboxing & review





In Depth Review for the Ulanzi Wide Angle Lens attacment for DJI Osmo Pocket. From unboxing, what is included, how to use, before and after pictures and my opinion of its quality.

Buy the Ulanzi Wide Angle Lens from Amazon:

https://amzn.to/2KruPNI

#ulanzi #osmopocket #wideangle

[EASY 30sec] Garage Door Opener Button Programming for Lexus RX 350 (als...





How to program your garage door opener button for your Lexus RX 350. This is a very easy and precise instruction to follow. In less than 30 seconds you will be able to set any of the 3 programmable button to open / close any garage door or gate.



Also works with Lexus IS, ES, GS and LS series and Toyota cars.



Please LIKE, SHARE and SUBSCRIBE!


Sunday, June 16, 2019

Setup Twilio Elastic SIP Trunk into 3CX (SIP Trunk, Inbound Rules, Exten...





Do you want to setup a VOIP phone number you just bought from Twilio to your 3CX PBX?  This video will show you how to setup Twilio Elastic SIP Trunk, authentication, Termination, Origination and 3CX Trunk, Inbound Rules and Outbound rules.



Please LIKE, SHARE and SUBSCRIBE.



#3CX   #twilio   #siptrunk   #voip   #pbx   #sip


Saturday, June 15, 2019

Wireless headphones review for Phone Calls - Trekz Air vs AirPods 2





I bought two of the best wireless headphones in the market today (June 2019). These two headphones are both non-ear-sealing type, meaning it will not fully plug-up your ears. I prefer these because I can hear my environment and it is more comfortable to use all-day. This review will focus on PHONE CALL quality, specifically to make sure people can hear me speaking during phone calls (microphone quality).

I will also give scores comparing the Trekz Air vs AirPods 2 in terms of music sound quality, ease of use, connectivity, multi-point pairing, battery longevity, etc... It is a complete head-to-head review between the Trekz vs Airpods 2.

If you are thinking about buying the Trekz Air or Airpods 2 please use my Amazon links below:

Trekz Air:
https://amzn.to/2FcuV7J
Airpods 2:
https://amzn.to/31zrGAR

Thank You for watching.
Please LIKE and SUBSCRIBE



Monday, June 10, 2019

Aftershokz Trekz Air - UNBOXING - bone conduction headphones





Unboxing the popular bone conduction headset called Trekz Air by Aftershokz. Full unboxing from brand new sealed box. I will show you all the items inside the box and describe each item one-by-one.

Do you want to buy one? Please use my Amazon link:

https://amzn.to/2MDiGqY

If you like this video, please hit the LIKE button and please subscribe to my channel

Apple AIRPODS 2 - "Geeky" In-depth UNBOXING





Unboxing of the new sealed Apple Airpods 2.  I have never own or used the Airpods.  This is really my first time trying to use the airpods. I am quite skeptical and very curious why this wireless headset is so popular. Check out my reactions, review and opinions.



If you would like to buy the Airpods please use my Amazon Link:



https://amzn.to/31nIWck



Thank You for watching my Airpods 2 Unboxing Video

Sunday, June 9, 2019

Sound Level Meter - MeterK MK09 - Measures loudness or quiteness





Geeky (detail) review of sound level meter made by MeterK (rated one of the best on Amazon). Watch this video to see how to use it, how well it works and what score I give it.

I bought this sound meter from Amazon:
https://amzn.to/31i8gQM

Please SUBSCRIBE to my channel to see more useful videos like this one.



Tips and Tricks - How to Level / Adjust refrigerator height [SUPER EASY]





Tips and Tricks - How to Level / Adjust refrigerator height [SUPER EASY]

Sunday, June 2, 2019

Reolink Argus 2 - Password Reset / Factory reset - resetup





I lost my password for my Reolink Argus 2 wifi surveillance camera. So I had to reset it to gain access. This video shows how I reset its password (actually have to reset to factory default). I also took this opportunity to insert a larger SD memory card.

DJI OSMO POCKET UNBOXING - SEE WHAT IS INCLUDED!





Watch this video to see the unboxing of a brand new DJI OSMO POCKET. See what are all the parts included! I bought this from B&H Photo but I am not sponsored by them.

Installing Exterior Light Fixture with Electrical from Inside + Sonoff S...





In this video, I demonstrate how we can install an exterior light fixture (goose neck lantern) by using electricity from inside the house (no pipes, no wires showing outside). I also use Sonoff Switch to control the light's power.

Saturday, June 1, 2019

Manual for Colosus Digital Keyless Lock

Change default master code to your own
1. Change default mastercode to your own mastercode
a. let's say you want to change the default mastercode 00123456 to 00121212

Enter *5#00#123456#121212# - you should hear a beep after entering which indicates success. 

Now you can use this code to unlock the door as well as add, and delete codes and other accessories (i.e. key fob, remote)

NOTE: When unlocking the door with a code, you need to enter "#" at the end. So to unlock using this mastercode it would be 00121212#.

Add passcode
Let’s say the made-up master code is 00121212

a. Assign a user prefix to your user passcode. This is a two digit number from 10-59 that will be the identifier for this user. For example the master code prefix is 00 and then 123456 is the passcode but you have to enter all 8 numbers together to unlock the door or perform any modifications.

Let’s say the prefix is 18 for this user and passcode you made up is 222222

b. Enter your mastercode - 00121212# - wait for a beep 
b. Enter *1#1#18222222# - a long beep indicates success

Now you can unlock the door by entering 18222222#

Add key fob 

a. Assign a user prefix to your key fob. The user prefix is a two digit number from 10-59 that will be the identifier for this key fob. Say you lose this key fob, and you want to delete it. You would delete the key fob by referencing the user prefix. [more on this in the manual under "delete one RF Card"] 

So for this example, let's say the key fob user prefix you assigned is 22 and your mastercode for this example is 00121212.

b. Enter your mastercode - 00121212# - wait for a beep 
c. Enter *2#1#22# - when you see a green light, hold key fob to the number pad - one beep should proceed this to indicate success 

To use the key fob, simply hold it against the number pad of the lock.

Add remote control

For this example the master code will be 00121212, prefix - 3

A. Assign a user prefix between 1-8, in this example we will use 3

b. Enter your mastercode - 00121212# - wait for a beep 

C. Enter *3#1#3# - when you see a green light, press and hold the unlock button of the remote control towards the lock for 3-4 seconds until you hear a beep which means it was successfully added.