Manual for Colosus Digital Keyless Lock

Change default master code to your own

1. Change default mastercode to your own mastercode

a. let's say you want to change the default mastercode 00123456 to 00121212

Enter *5#00#123456#121212# - you should hear a beep after entering which indicates success. 

Now you can use this code to unlock the door as well as add, and delete codes and other accessories (i.e. key fob, remote)

NOTE: When unlocking the door with a code, you need to enter "#" at the end. So to unlock using this mastercode it would be 00121212#.

Add passcode

Let’s say the made-up master code is 00121212

a. Assign a user prefix to your user passcode. This is a two digit number from 10-59 that will be the identifier for this user. For example the master code prefix is 00 and then 123456 is the passcode but you have to enter all 8 numbers together to unlock the door or perform any modifications.

Let’s say the prefix is 18 for this user and passcode you made up is 222222. 

b. Enter your mastercode - 00121212# - wait for a beep 

b. Enter *1#1#18222222# - a long beep indicates success

Now you can unlock the door by entering 18222222#

Add key fob 

a. Assign a user prefix to your key fob. The user prefix is a two digit number from 10-59 that will be the identifier for this key fob. Say you lose this key fob, and you want to delete it. You would delete the key fob by referencing the user prefix. [more on this in the manual under "delete one RF Card"] 

So for this example, let's say the key fob user prefix you assigned is 22 and your mastercode for this example is 00121212.

b. Enter your mastercode - 00121212# - wait for a beep 

c. Enter *2#1#22# - when you see a green light, hold key fob to the number pad - one beep should proceed this to indicate success 

To use the key fob, simply hold it against the number pad of the lock.

Add remote control

For this example the master code will be 00121212, prefix - 3

A. Assign a user prefix between 1-8, in this example we will use 3. 

b. Enter your mastercode - 00121212# - wait for a beep 

C. Enter *3#1#3# - when you see a green light, press and hold the unlock button of the remote control towards the lock for 3-4 seconds until you hear a beep which means it was successfully added.